Tomei +1mm Over Sized Valve Set (IN & EX) - R35 Nissan GT-R

Tomei +1mm Over Sized Valve Set (IN & EX) - R35 Nissan GT-R

click the main image to enlarge

$804.00
Available: Many in stock

High Flow, Improved Durability, for Extreme & High Power Applications!!

UpgradedĀ engines require as much fuel mixture to enter the combustion chamber as possible. So a larger diameter design was selected to optimize flow rates. Due to the extremely high temperature conditions experienced in the combustion chamber during high power runs the durability of the valves were also addressed to improve resistance to high heat conditions. The TOMEI over sized valves were designed with the above factors and more so with the careful selection of materials to suit these conditions to the precision in the design and manufacturing processes to maximize the intake and exhaust flow rates will make your engine capable of big power when needed most.

OVER SIZED VALVE FEATURES

HIGH FLOW DESIGN

1mm OVERSIZED WAIST SHAPE

1mm oversized valves were designed for increased flow efficiency on both the intake and exhaust side. The stem has a thinner design for maximizing air flow rate within the port with the reduced air flow resistance. This design with the materials used also allowed for a lighter product as well.

PRECISION DESIGN

To maximize the potential of the valves purpose each factor was addressed during the design process from the surface of the valve head (umbrella section) & the Valve Seat, from Stem to Cotter are all optimized with precision for optimum operating & sealing capabilities when needed most during extreme conditions.

SURFACE TREATMENT (INTAKE SIDE ONLY)

Improved Wear Rate Improved Fatigue Rate

Improved heat resistance Improved corrosion resistance

HIGH HEAT RESISTANCE

IN: SUH35 MATERIAL
The SUH35 material which is known for it's high heat resistance properties are usually used for the exhaust side. We chose to use it for the Intake side to suit the the demands of todays users for big power applications and for increased life.

EX: INCONEL 751 MATERIAL
Since the exhaust side can experience extreme exhaust gas temperatures of 1,000 degrees C (1,832 degrees F) during high power use the Inconel 751 material was no doubt the best option to choose to suit serious needs when every detail counts.

$804.00
- +

High Flow, Improved Durability, for Extreme & High Power Applications!!

UpgradedĀ engines require as much fuel mixture to enter the combustion chamber as possible. So a larger diameter design was selected to optimize flow rates. Due to the extremely high temperature conditions experienced in the combustion chamber during high power runs the durability of the valves were also addressed to improve resistance to high heat conditions. The TOMEI over sized valves were designed with the above factors and more so with the careful selection of materials to suit these conditions to the precision in the design and manufacturing processes to maximize the intake and exhaust flow rates will make your engine capable of big power when needed most.

OVER SIZED VALVE FEATURES

HIGH FLOW DESIGN

1mm OVERSIZED WAIST SHAPE

1mm oversized valves were designed for increased flow efficiency on both the intake and exhaust side. The stem has a thinner design for maximizing air flow rate within the port with the reduced air flow resistance. This design with the materials used also allowed for a lighter product as well.

PRECISION DESIGN

To maximize the potential of the valves purpose each factor was addressed during the design process from the surface of the valve head (umbrella section) & the Valve Seat, from Stem to Cotter are all optimized with precision for optimum operating & sealing capabilities when needed most during extreme conditions.

SURFACE TREATMENT (INTAKE SIDE ONLY)

Improved Wear Rate Improved Fatigue Rate

Improved heat resistance Improved corrosion resistance

HIGH HEAT RESISTANCE

IN: SUH35 MATERIAL
The SUH35 material which is known for it's high heat resistance properties are usually used for the exhaust side. We chose to use it for the Intake side to suit the the demands of todays users for big power applications and for increased life.

EX: INCONEL 751 MATERIAL
Since the exhaust side can experience extreme exhaust gas temperatures of 1,000 degrees C (1,832 degrees F) during high power use the Inconel 751 material was no doubt the best option to choose to suit serious needs when every detail counts.

Clothing - Single Size Conversion (Continued)
UK
  • 18
  • 20
  • 22
  • 24
  • 26
European
  • 46
  • 48
  • 50
  • 52
  • 54
US
  • 14
  • 16
  • 18
  • 20
  • 22
Australia
  • 8
  • 10
  • 12
  • 14
  • 16

Quisque sodales sodales lacus pharetra bibendum. Etiam commodo non velit ac rhoncus. Mauris euismod purus sem, ac adipiscing quam laoreet et. Praesent vulputate ornare sem vel scelerisque. Ut dictum augue non erat lacinia, sed lobortis elit gravida. Proin ante massa, ornare accumsan ultricies et, posuere sit amet magna. Praesent dignissim, enim sed malesuada luctus, arcu sapien sodales sapien, ut placerat eros nunc vel est. Donec tristique mi turpis, et sodales nibh gravida eu. Etiam odio risus, porttitor non lacus id, rhoncus tempus tortor. Curabitur tincidunt molestie turpis, ut luctus nibh sollicitudin vel. Sed vel luctus nisi, at mattis metus. Aenean ultricies dolor est, a congue ante dapibus varius. Nulla at auctor nunc. Curabitur accumsan feugiat felis ut pretium. Praesent semper semper nisi, eu cursus augue.

UPSELL PRODUCTS