Fore Innovations R35 Nissan GT-R Triple Pump Module

Fore Innovations R35 Nissan GT-R Triple Pump Module

click the main image to enlarge

$1,465.00
Available: Many in stock
The Fore Innovations Triple Pump Module for the R35 GT-R is our go to pump hanger when upgrading to three pumps and it is a work of art.  Made in house at Fore Innovations in Florida, USA, this module is made from billet aluminum and retains the use of the factory fuel level & temperature sensors as well as the tank siphon system.  The module will come pre-assembled and wired with three Walbro 485 hi pressure pumps; all you need to do is choose your options for the outside of the unit and you're all set! 
  • Supports over 1600 all wheel horsepower
  • E85 and race fuel compatible (see pump manufacturer recommendations on fuel compatibility)
  • Requires aftermarket fuel feed and return lines
  • Retains OEM level sender, temperature sensor, and transfer function
  • O-ring pump seal eliminates in-tank fuel hose to completely eliminate failures in E85 and race gas applications
  • High current hermetic wire seal completely eliminates the possibility of fuel smells and leaks
  • 12 gauge power wires ensure maximum pump performance
  • Polymer pump support minimizes pump noise and eliminates electrolysis
  • Transfers without restrictor orifice on return discharge, ensuring accurate fuel pressure under any output or consumption conditions

Optional Selections: 

Feed Fittings:

  • OEM Feed & Return Line Adapter Fitting Set
  • -8 AN Male 90° low profile
  • -10 AN Male 90° low profile

Return Fittings:

  • -6 AN Male 90° low profile
  • -8 AN Male 90° low profile
  • -10 AN Male 90° low profile

Electrical Upgrade: 

  • FC2 Controller with 6 gauge wiring
  • FC3 Staged Controller with 4 gauge wiring
  • Sealed Delphi Connector and 7' 12 AWG pigtail only

 

Contact us for dissimilar pump configurations. (i.e. AEM 50-1200 full time, with dual Walbro F90000267 on demand)
$1,465.00
- +
The Fore Innovations Triple Pump Module for the R35 GT-R is our go to pump hanger when upgrading to three pumps and it is a work of art.  Made in house at Fore Innovations in Florida, USA, this module is made from billet aluminum and retains the use of the factory fuel level & temperature sensors as well as the tank siphon system.  The module will come pre-assembled and wired with three Walbro 485 hi pressure pumps; all you need to do is choose your options for the outside of the unit and you're all set! 
  • Supports over 1600 all wheel horsepower
  • E85 and race fuel compatible (see pump manufacturer recommendations on fuel compatibility)
  • Requires aftermarket fuel feed and return lines
  • Retains OEM level sender, temperature sensor, and transfer function
  • O-ring pump seal eliminates in-tank fuel hose to completely eliminate failures in E85 and race gas applications
  • High current hermetic wire seal completely eliminates the possibility of fuel smells and leaks
  • 12 gauge power wires ensure maximum pump performance
  • Polymer pump support minimizes pump noise and eliminates electrolysis
  • Transfers without restrictor orifice on return discharge, ensuring accurate fuel pressure under any output or consumption conditions

Optional Selections: 

Feed Fittings:

  • OEM Feed & Return Line Adapter Fitting Set
  • -8 AN Male 90° low profile
  • -10 AN Male 90° low profile

Return Fittings:

  • -6 AN Male 90° low profile
  • -8 AN Male 90° low profile
  • -10 AN Male 90° low profile

Electrical Upgrade: 

  • FC2 Controller with 6 gauge wiring
  • FC3 Staged Controller with 4 gauge wiring
  • Sealed Delphi Connector and 7' 12 AWG pigtail only

 

Contact us for dissimilar pump configurations. (i.e. AEM 50-1200 full time, with dual Walbro F90000267 on demand)
Clothing - Single Size Conversion (Continued)
UK
  • 18
  • 20
  • 22
  • 24
  • 26
European
  • 46
  • 48
  • 50
  • 52
  • 54
US
  • 14
  • 16
  • 18
  • 20
  • 22
Australia
  • 8
  • 10
  • 12
  • 14
  • 16

Quisque sodales sodales lacus pharetra bibendum. Etiam commodo non velit ac rhoncus. Mauris euismod purus sem, ac adipiscing quam laoreet et. Praesent vulputate ornare sem vel scelerisque. Ut dictum augue non erat lacinia, sed lobortis elit gravida. Proin ante massa, ornare accumsan ultricies et, posuere sit amet magna. Praesent dignissim, enim sed malesuada luctus, arcu sapien sodales sapien, ut placerat eros nunc vel est. Donec tristique mi turpis, et sodales nibh gravida eu. Etiam odio risus, porttitor non lacus id, rhoncus tempus tortor. Curabitur tincidunt molestie turpis, ut luctus nibh sollicitudin vel. Sed vel luctus nisi, at mattis metus. Aenean ultricies dolor est, a congue ante dapibus varius. Nulla at auctor nunc. Curabitur accumsan feugiat felis ut pretium. Praesent semper semper nisi, eu cursus augue.

UPSELL PRODUCTS